rate of finished products
英 [reɪt ɒv ˈfɪnɪʃt ˈprɒdʌkts]
美 [reɪt əv ˈfɪnɪʃt ˈprɑdəkts]
网络 成品率
双语例句
- Edge drop is an important quality evaluating index for cross-section, which closely relates to side trimming and the rate of finished products.
边部减薄是带钢重要的断面质量指标，现代轧机中，轧辊的横移装置对边部减薄的控制起到了重要的作用。 - So the combined pottery table has the advantages of light quality, better decorative effect, low cost, convenient manufacture and high rate of finished products.
不仅使得陶台质量轻便，装饰效果更好，而且成本低，制作方便，成品率高。 - Drilling technique is adopted in production, so the rate of finished products has been greatly raised.
在生产中采用了钻孔工艺，使制品合格率大幅度提高。 - Has provided use convenient in the leather craft, can enhance the rate of finished products the scale.
在皮革工艺上提供了使用的方便，更能提高成品率的档次。 - Because it is difficult to control rolling process of molybdenum sheet, there is much defective material and low rate of finished products.
钼板轧制工艺过程难以控制，轧废现象严重、成品率低，导致生产成本增大，因而寻求适宜的加工工艺势在必行。 - It can reduce the damage of fibers, also can ensure the stem of yarn, increase the rate of finished products.
并且适当降低了各机台部件的回转速度，既可以减少对纤维的损伤，又可以保证纱线条干，提高纱线的制成率。 - Curing the positive grid and controlling strictly the possible variation of gird curing layer can greatly improve the passing rate of finished products and effectively resolve the problem of PCL.
采用正极板栅表面氧化处理工艺，严格控制板栅处理层可能发生的变异，能大大提高成品合格率，有效地解决高功率电池早期容量衰减的问题。 - Automatic design of optical coatings with calculated rate of finished products as the end merit index
以模拟计算的制造成品率为最终评价指标的光学薄膜自动设计 - The grinding-balls made of high-chrome cast iron are expensive, complicated in technology, lower in the rate of finished products; these factors limit their using broadly.
由于高铬铸铁磨球生产成本高，熔铸工艺复杂，参数控制要求严格，成品率又较低等问题，使其推广应用受到限制。 - Through studies of electrostatic prevention in the process of semiconductor laser arrays and stacks assembling, we have increased rate of finished products and reduced the loss induced by electrostatic in the process of assembling.
通过对半导体激光器列阵及叠阵组装过程中静电的防护进行研究，提高了成品率，减少了组装过程中由于静电造成的损失。 - By adopting proper alloying with low alloy addition, high CE, acquiring high temperature and high quality iron liquid, and intensifying inoculation, it is possible to increase the rate of finished products of the thinwalled and high-strength gray iron casting including engine block and head.
通过采用低合金化、高碳当量、获得高温优质铁液和孕育处理等措施，可以有效地提高发动机缸体和缸盖等薄壁高强度灰铸铁件的成品率。 - The emergence of these problems can deeply reduce the rate of finished products, thus affect the economic benefit of enterprises and the development of industrial technique.
这些问题的出现会大大降低产品的成品率，从而影响到企业的经济效益及行业的技术发展。 - It has been proved that the production rate of finished products is increased and the life of dies is prolonged. This is of realistic significance for the design of profiled dies.
通过实践证明提高了产品成材率，延长了模具寿命，对异型模具设计具有现实意义。 - The relation between the processing of the devices fabrication and the rate of finished products ate also investigated and discussed.
对器件制作的某些工艺与成品率之间的关系进行了分析和探讨.文中以表格和概率统计反映各种影响因素与成品率的关系，给出了一些晶片质量和器件性能的图片。 - To realize plan view pattern control, a forecast model is set up based on genetic programming ( GP), in order to increase the rate of finished products.
为实现平面形状控制，提高成材率，应用遗传规划算法建立了中厚板边部和头尾的预测模型。 - In the production line of high-frequency welded tube, the main causes of directly influencing the production efficiency and the rate of finished products are high-frequency heating equipment and the load regulation.
在高频焊管生产线中，直接影响生产效率和成品率的主要原因是高频加热设备及负载的调整。 - The method can chang the finished product test into process control, then the qualified rate of finished products is promoted.
该方法能有效地起到过程控制的目的，变事后检验为事先控制，保证产品的质量。 - The simplicity of technology, low production cost, high rate of finished products, easy production of industrialization are advantages of this technology.
本方法的优点是工艺简单、成本低、成品率高，便于工业化生产。 - The purpose of present work was to avoid check cracks on the surface of glass-ceramics in MgO-Al2O3-SiO2 system which usually appeared during manufacturing process, so as to improve the quality and enhance the rate of finished products.
本工作目的旨在消除MgO-Al2O3-SiO2系统微晶玻璃生产过程中产生的表面龟裂，以提高产品质量和成品率。 - Fiber grating is manufactured by application of phase mask means, which is of low requirement of time coherence and monochromaticity for light-source, simple craft and high rate of finished products.
运用相位掩模法刻蚀光纤光栅，该方法对光源的时间相干性和单色性要求较低，工艺简单，成品率高。 - Process of pre-heating before forging and heating characteristics for H. S. S. ingot are discussed, the effects of heat preservation in high temperature on improving ingot plasticity, raising rate of finished products and productivity rate are stated.
讨论了高速钢钢锭的锻前加热工艺及其加热特性，阐述了高温保温对提高高速钢锭塑性、成材率以及生产效率的作用。 - Silicon carbide electro-heating element under conventional production technology have some disadvantages of big resistance discreteness, the low rate of finished products, low intensity, low usage temperature and bad density.
传统工艺条件下生产的碳化硅电热元件存在着电阻离散性大、成品率低、强度低、使用温度低、致密度差等问题。 - By use of these technological measures, the manufacturer of the sensors has attained the goal to guarantee the quality, reduce the cost and increase the rate of finished products.
通过这些措施的实施，使传感器的工程化生产实现了保证质量、降低成本、提高成品率的目的。 - However, when the content of Si is about 10%, its plasticity is poor, particularly in cold-rolling process. The poor plasticity led to the strip breakage in rolling process and it reduced the rate of finished products.
然而，4004Al-Si合金，由于含Si量在10%左右，塑性差，特别是冷轧性能差，进而导致轧制过程中易产生断带，成品率低。 - Through the implementation of MES, a considerable number of enterprises realized real-time shop floor production process, fine and visual management, which led a big improvement in Qualification rate of finished products and manufacturing efficiency and product quality.
借助MES的实施，企业可实现车间生产过程的可视化、实时化及精细化管理，从而显著提升车间生产成品合格率、制造效率及产品质量。 - Monocrystalline silicon wafers are the most widely used substrates in IC manufacturing fields. The surface layer quality directly affects the property, the rate of finished products and the lifetime of IC device.
单晶硅片是集成电路（IC）制造过程中最常用的衬底材料，硅片的表面层质量直接影响着器件的性能、成品率以及寿命。 - Compaction system is one of the most important equipment for lost foam casting, the effects of the Compaction system influence the rate of finished products, dimensionalaccuracy, Surface quality and the quality of the products directly.
震实台是消失模铸造必备的关键设备之一，振动紧实的效果直接影响到铸件的成品率、尺寸精度、表面质量以及产品的品质。 - However, forging process is a highly nonlinear and complicated aggregation. Due to the shortage of design methods, it will have a negative effect on the stability of forgings and the rate of finished products is also low.
锻造过程是一个高度非线性的复杂体，由于设计方法的不足容易造成锻件性能不稳定、成品率低等不良后果。 - Many experiment show the yield rate of finished products is more than 90%.
并进行了大批量的真空封装实验，成品率在90%以上。